YaBB Community and Support Forum
YaBB Home About YaBB Download YaBB YaBB Support Customize Your Forum Development Contribute to the Project
  Welcome, Guest. Please Login or Register


 
Pages: 1 2 3 
Topic Tools
 
Spracheinstellung für Bestandsbenutzer "admin" ändern (Read 5,056 times)
 Nov 22nd, 2012 at 9:53am
There are no actions to perform.  

banyooo 
YaBB Newbie
*
Offline
Posts: 24


YaBB 2.5
Spracheinstellung für Bestandsbenutzer "admin" ändern
Hi Leute,
wie kann ich denn die Spracheinstellung als Standard für einen bereits vorhandenen Benutzer "admin" ändern?
 
Viele Grüße
Dirk
 
IP Logged  
 Reply #1 - Nov 22nd, 2012 at 10:21am
There are no actions to perform.  

banyooo 
YaBB Newbie
*
Offline
Posts: 24


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
Ok, man kann das in den Options einstellen - nur da komme ich nicht hin:

Can't open directory (/xxxx/homepages/xx/xxxxxx/CDL/forum/yabbfiles/avatars)!
Please inform the Administrator of this forum that the $facesdir setting must be fixed immediately.

Welcher Einträge müssen da hin? Alle anderen Zugriffe im Profil funktionieren.
 
Viele Grüße
Dirk
 
IP Logged  
 Reply #2 - Nov 22nd, 2012 at 11:43am
There are no actions to perform.  

depablo 
YaBB Moderators
YaBB Next Team
Beta Testers
***
Offline
Posts: 577
UK


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
Check your paths to files in admin centre
 
Taking a peek behind the mask Wink
 
IP Logged  
 Reply #3 - Nov 22nd, 2012 at 12:31pm
There are no actions to perform.  

banyooo 
YaBB Newbie
*
Offline
Posts: 24


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
Thanks, I allready checked this and they seemd to be ok.
Can you please give me an example of your settings for avatars and attachments?
 
Viele Grüße
Dirk
 
IP Logged  
 Reply #4 - Nov 22nd, 2012 at 12:39pm
There are no actions to perform.  

depablo 
YaBB Moderators
YaBB Next Team
Beta Testers
***
Offline
Posts: 577
UK


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
Check this post until someone else jumps in
http://www.yabbforum.com/community/YaBB.pl?num=1351787956/1#1
 
Taking a peek behind the mask Wink
 
IP Logged  
 Reply #5 - Nov 22nd, 2012 at 12:46pm
There are no actions to perform.  

banyooo 
YaBB Newbie
*
Offline
Posts: 24


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
Checked,
I am using:
$facesdir = "/kunden/homepages/44/d1358XXX/CDL/forum/yabbfiles/public_html/avatars";

on a hosted system. Also if I remove "public_html" it wont work.
 
Viele Grüße
Dirk
 
IP Logged  
 Reply #6 - Nov 22nd, 2012 at 1:50pm
There are no actions to perform.  

depablo 
YaBB Moderators
YaBB Next Team
Beta Testers
***
Offline
Posts: 577
UK


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
Looks like your public-html directory is in the wrong place. I don't know your hosting setup but its usually public-html/domain name. I'm at work at present, suggest you either have a play around yourself or wait until someone else comes around. This should be an easy fix so hang in there  Smiley
 
Taking a peek behind the mask Wink
 
IP Logged  
 Reply #7 - Nov 22nd, 2012 at 2:49pm
There are no actions to perform.  

xnoddyx 
Support Team
Documentation Team
YaBB Moderators
YaBB Next Team
Beta Testers
****
Online
Posts: 1,555
UK:Scotland/livingston


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
depablo wrote on Nov 22nd, 2012 at 12:39pm:
Check this post until someone else jumps in
http://www.yabbforum.com/community/YaBB.pl?num=1351787956/1#1

it's cool and good work Wink

banyooo wrote on Nov 22nd, 2012 at 12:46pm:
Checked,
I am using:
$facesdir = "/kunden/homepages/44/d1358XXX/CDL/forum/yabbfiles/public_html/avatars";

on a hosted system. Also if I remove "public_html" it wont work.

ok the format looks off to me e.g. of working /websites/123reg/LinuxPackage25/yd/id/br/cyberwebs-wd.co.uk/public_html/yabbfile
s

and

Code Select All
/websites/123reg/LinuxPackage25/yd/id/br/cyberwebs-wd.co.uk/cgi-bin/yabb2 


OR
Code Select All
/websites/123reg/LinuxPackage25/yd/id/br/cyberwebs-wd.co.uk/public_html/cgi-bin/yabb2 



so avatars will look like this

Code Select All
/websites/123reg/LinuxPackage25/yd/id/br/cyberwebs-wd.co.uk/public_html/yabbfiles/avatars 



hope this is of help to you  Smiley
« Last Edit: Nov 22nd, 2012 at 2:52pm by xnoddyx »  
YaBB install help video
1. what yabb forum are you running and the url
2. describe in as much detail as you can what happens and also post screenshots if you can
3. please be patient we live in different time zones and have other commitments but we will help you
as bill and ted say (Be excellent to each other)
WWW xnoddyx xnoddyx1  
IP Logged  
 Reply #8 - Nov 22nd, 2012 at 2:52pm
There are no actions to perform.  

banyooo 
YaBB Newbie
*
Offline
Posts: 24


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
Well, I moved it to ../public_html/mywebsite.com/yabbfiles  but it is the same result.
I will wait, maybe someone else willpost something, thanks!
 
Viele Grüße
Dirk
 
IP Logged  
 Reply #9 - Nov 22nd, 2012 at 3:17pm
There are no actions to perform.  

banyooo 
YaBB Newbie
*
Offline
Posts: 24


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
no change to get it to run.
At least it doesn't matter where public_html/yabbfiles is located as far as I configurer the right path in paths.pl, right?
 
Viele Grüße
Dirk
 
IP Logged  
 Reply #10 - Nov 22nd, 2012 at 3:48pm
There are no actions to perform.  

xnoddyx 
Support Team
Documentation Team
YaBB Moderators
YaBB Next Team
Beta Testers
****
Online
Posts: 1,555
UK:Scotland/livingston


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
banyooo wrote on Nov 22nd, 2012 at 10:21am:
Ok, man kann das in den Options einstellen - nur da komme ich nicht hin:

Can't open directory (/xxxx/homepages/xx/xxxxxx/CDL/forum/yabbfiles/avatars)!
Please inform the Administrator of this forum that the $facesdir setting must be fixed immediately.

Welcher Einträge müssen da hin? Alle anderen Zugriffe im Profil funktionieren.

ok here you have the forum loading Paths.pl and looking for
(/xxxx/homepages/xx/xxxxxx/CDL/forum/yabbfiles/avatars)!

but here you say it is
banyooo wrote on Nov 22nd, 2012 at 12:46pm:
$facesdir = "/kunden/homepages/44/d1358XXX/CDL/forum/yabbfiles/public_html/avatars";


so you do have a problem with your Paths if you want i can check them for you if you post a copy of your Paths.pl as Paths.pl.txt also can you check that all your DIR's have the correct CHMOD.
 
YaBB install help video
1. what yabb forum are you running and the url
2. describe in as much detail as you can what happens and also post screenshots if you can
3. please be patient we live in different time zones and have other commitments but we will help you
as bill and ted say (Be excellent to each other)
WWW xnoddyx xnoddyx1  
IP Logged  
 Reply #11 - Nov 22nd, 2012 at 3:59pm
There are no actions to perform.  

banyooo 
YaBB Newbie
*
Offline
Posts: 24


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
Thanks,
the paths.pl contains clear information aboute the domain I do not want to post here (at the moment, there are reasons for that)
aktually I am using:
HTML-Dir: /kunden/homepages/44/d135XXX/CDL/forum/public_html/yabbfiles
attachments: /kunden/homepages/44/d135XXX/CDL/forum/yabbfiles/public_html/attachments
avatars: /kunden/homepages/44/d135XXX/CDL/forum/yabbfiles/public_html/avatars
URL: http://www.XXX.eu/forum/cgi-bin/yabb2
root-url: http://www.XXX.eu/forum/public_html/yabbfiles
attachment url: http://www.XXX.eu/forum/public_html/yabbfiles/attachments
avatar-url: http://www.XXX.eu/forum/public_html/yabbfiles/avatars

I have checked all permissions, I cannot find a mistake there.
 
Viele Grüße
Dirk
 
IP Logged  
 Reply #12 - Nov 22nd, 2012 at 4:03pm
There are no actions to perform.  

banyooo 
YaBB Newbie
*
Offline
Posts: 24


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
correction:

attachments: /kunden/homepages/44/d135XXX/CDL/forum/public_html/yabbfiles/attachments

avatars: /kunden/homepages/44/d135XXX/CDL/forum/public_html/yabbfiles/avatars
 
Viele Grüße
Dirk
 
IP Logged  
 Reply #13 - Nov 22nd, 2012 at 5:42pm
There are no actions to perform.  

xnoddyx 
Support Team
Documentation Team
YaBB Moderators
YaBB Next Team
Beta Testers
****
Online
Posts: 1,555
UK:Scotland/livingston


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
ok from what i can see here
banyooo wrote on Nov 22nd, 2012 at 4:03pm:
correction:

attachments: /kunden/homepages/44/d135XXX/CDL/forum/public_html/yabbfiles/attachments

avatars: /kunden/homepages/44/d135XXX/CDL/forum/public_html/yabbfiles/avatars


and here
banyooo wrote on Nov 22nd, 2012 at 3:59pm:


this part
/kunden/homepages/44/d135XXX/CDL/forum/public_html/yabbfiles/

should be
/kunden/homepages/44/d135XXX/CDL/public_html/forum/yabbfiles/
 
YaBB install help video
1. what yabb forum are you running and the url
2. describe in as much detail as you can what happens and also post screenshots if you can
3. please be patient we live in different time zones and have other commitments but we will help you
as bill and ted say (Be excellent to each other)
WWW xnoddyx xnoddyx1  
IP Logged  
 Reply #14 - Nov 23rd, 2012 at 1:45pm
There are no actions to perform.  

banyooo 
YaBB Newbie
*
Offline
Posts: 24


YaBB 2.5
Re: Spracheinstellung für Bestandsbenutzer "admin" ändern
Even if it makes absolute no sense to I have tried it - same result.

Actual settings as screenshot attached
« Last Edit: Nov 23rd, 2012 at 1:47pm by banyooo »  
Viele Grüße
Dirk
 
IP Logged  
Pages: 1 2 3 
Topic Tools
 

Get Yet another Bulletin Board at SourceForge.net. Fast, secure and Free Open Source software downloads Support This Project BoardMod - YaBB features and templates YaBB Codex - support on installation and usage YaBB Toolbar for your browser

YaBB Facebook Group Page

Vulnerability Scanner

Valid RSS Valid XHTML Valid CSS Powered by Perl
YaBB Chat and Support Community » Powered by YaBB 3.0 Beta!
YaBB Forum Software © 2000-2011. All Rights Reserved.